For Manufacturing

Prepare for equipment failure
with data, not guesswork.

The Intelligent Control Panel is an equipment monitoring panel: it controls your motors and pumps while recording temperature, current and vibration around the clock, and alerts you when values leave their limits. Only one Intelligent Control Panel is installed on site.

Request an assessment → Call +82-51-862-3668
Check

Your site needs an
Intelligent Control Panel if

Equipment runs unattended at night or on weekends
A motor or pump failure has stopped production before
Experienced maintenance staff are retiring or hard to find
Inspection records are kept on paper or in spreadsheets
You plan to replace aging control panels (pumps, blowers, etc.)
You are considering government smart factory programs
Benefits

What changes after installation

The Intelligent Control Panel is built for equipment monitoring and predictive maintenance. Replace your pump, blower or compressor control panels with it, and control stays the same while operating data builds up and early warning signs become visible.

01

Equipment condition
recorded 24/7

Winding and bearing temperatures, current and power, vibration and speed are collected and kept as history automatically.

02

Early warning
of anomalies

Alarms are sent when values leave the limits you set, so you can act before a fault turns into a failure.

03

Panel replacement and data
in one step

One Intelligent Control Panel handles both control and data collection, with no extra collection hardware.

Motor winding temp. U·V·WBearing temp.SpeedVoltage · current · energyVibrationAmbient temp. & humidityRun status signals
Process

How we deliver

STEP 1 · 1 wk

Site survey

Target equipment, existing panels, data points

STEP 2 · 5 wks

Intelligent Control Panel build

Design, build, wiring, PLC program, factory test

STEP 3 · 2 wks

Server setup

Encrypted link, data storage and dashboard

STEP 4 · 2–4 wks

Commissioning

On-site commissioning, alarm limits, operator training

Typical lead time 9–15 weeks, depending on site conditions. See also PLC programming with panel building →

Options

Start small,
scale step by step

From building the panel to data services and maintenance, we configure what your site needs.

01 · BUILD

Intelligent Control Panel

We design, build and install a panel that controls your machines and collects their data.

  • New installation or panel replacement
  • PLC programming · factory test · commissioning
  • Start with one or two machines, then expand
02 · DATA

Data Services

Operating data is stored in the cloud or on your own server and delivered as dashboards and alarms.

  • Encrypted connection · data storage
  • Dashboard · early-warning alarms
  • MES and analytics integration (API)
03 · OPERATE

Maintenance

After installation, we keep managing machine status and alarm settings with you.

  • Remote status checks · regular inspection
  • Alarm threshold tuning · operator training
  • On-site support · parts replacement
Cloud

Connect to DONG-IN ENSIS cloud

  • Fast setup with no server to install
  • Check data anytime on web and mobile
  • Manage multiple plants on one screen
On-premise

Install on your own server

  • DataHub and dashboard run inside your network, with no external internet connection
  • Use your existing server, or we supply one
  • For sites whose security policy does not allow external cloud

Both options use the same data structure and API. Maintenance for on-premise systems is agreed to fit your security policy.

What determines the cost

  • EquipmentNumber of machines · motor ratings
  • Data pointsSensor set: temperature, current, vibration, etc.
  • NetworkPlant network or LTE
  • Existing panelReplacement or new installation

After a site survey we provide a configuration proposal with a quote. Terms for data services and maintenance are explained during consultation.

Government smart-factory programs

  1. Check programsWe review available programs with you
  2. Proposal · quoteAs a registered smart-factory supplier, we prepare a configuration that fits the program plan
  3. ApplicationWe help prepare the technical documents
  4. Build after selectionInstallation, commissioning and after-sales support

Funding ratios, limits and schedules follow each program's announcement.

Security

Machine safety and data security,
together

The connection structure and management principles your security team will want to review.

Customer site
Machines · sensors
→
Intelligent Control PanelPLC control · data collection
Cloud or your own server
DataHubStorage · management
→
Dashboard · APICustomer · partner systems

Network and security configuration is agreed to fit your site and security policy.

FAQ

Frequently asked questions

Which equipment can it be applied to?

Most motor-driven equipment: pumps, blowers and fans, compressors, conveyors, cranes and hoists, and marine equipment, across shipbuilding and offshore, hydrogen and energy, manufacturing and data centers. See applications →

Do we need to replace our motors or pumps?

No. The equipment stays as it is; the control panel is replaced with an Intelligent Control Panel or newly installed. We propose the best approach based on the existing panel during the site survey.

Can it replace our pump or blower control panels?

Yes. Replace aging pump, blower or compressor control panels with the Intelligent Control Panel and the equipment keeps running as before, while temperature, current and vibration are recorded 24/7 for equipment monitoring and predictive maintenance. We propose the replacement approach after the site review.

Can we start with only part of our equipment?

Yes. Start with one or two machines, see how the data and alarms are used, then expand to other machines in the same structure. Because the data structure stays the same, no new monitoring screens need to be built.

How long does it take, and how long will machines stop?

A standard project takes 9 to 15 weeks: site survey 1 week, panel build 5 weeks, server setup (cloud or on-premise) 2 weeks, commissioning 2 to 4 weeks. Panels are built and tested in our factory before installation, and the changeover is scheduled around your production plan. Timelines vary with site conditions.

What data can we see?

Motor winding temperature (U·V·W), bearing temperature, speed, voltage, current and energy, vibration, ambient temperature and humidity, and run-status signals, recorded 24/7. Current status and history for each machine are shown on the dashboard.

How are we alerted to anomalies?

When a value goes beyond its threshold, the dashboard (web and mobile) shows a warning or alarm, so you can schedule maintenance before it becomes a failure.

Who sets the alarm thresholds?

During commissioning we set thresholds together with you based on each machine's characteristics and operating data, and train your operators. Thresholds can be adjusted later as part of maintenance.

Does it offer AI predictive maintenance?

Threshold-based alarms work from day one. AI anomaly detection that learns from normal operating data is being advanced at the PoC stage, with plans to expand into predictive maintenance on real data. It can also be applied together with AI analytics partners.

Can it be installed where there is no internet?

Yes, with an LTE communication module. We check the site's communication environment during the site survey.

Is data lost when the connection drops?

No. Equipment control continues on the site PLC, and readings taken while the connection is down are stored in the control panel and resent automatically once it is back, so the operating history has no gaps.

Our plant cannot use an external cloud. Can we still adopt it?

Yes. With the on-premise option, DataHub and the dashboard are installed on your server or inside your network and run with no external internet connection. We can use your existing server or supply one. Maintenance is agreed to fit your security policy. See deployment options →

How are data security and equipment safety handled?

The site and the cloud or your server are connected through TLS encryption. Interlocks and final control remain with the on-site PLC; the server never controls equipment directly. Accounts, permissions and data retention are defined in the contract. See security overview →

What maintenance is provided after installation?

Remote status checks, regular inspection, alarm threshold tuning, operator training, and on-site support and parts replacement. The company that designed and built the panel also takes care of after-sales service. See options →

Can we use government support programs?

DONG-IN ENSIS is a registered smart-factory supplier in Korea. We review available support programs with you and help prepare the technical documents. Funding ratios and limits follow each program's announcement. See how it works →

What does it cost?

It depends on the number of machines and motor ratings, the data points, the network environment and whether an existing panel is replaced. We provide a configuration proposal with a quote after the site survey. See options and costs →

Inquiry

Request a
site assessment

Tell us about your equipment and one of our engineers will get back to you.

  • ResponseWithin 1–2 business days (KST)
  • Assessment coversFeasibility, recommended configuration, expected schedule
  • Phone+82-51-862-3668
Consent to collection and use of personal information
Items: company, name, position, phone, e-mail, message · Purpose: to review and respond to your inquiry · Retention: 1 year after the inquiry is resolved (or as required by law)
You may decline, but we will not be able to receive your inquiry. See our Privacy Policy for details.