DONG-IN ENSIS takes care of the OT scope in smart factory and AI factory projects, from control panel design and build to PLC integration and a standard data API.
We handle control panels, PLCs and site installation in your projects.
Equipment data collected by our panels is delivered to your platform through a standard API, ready for MES integration, monitoring and AI analytics.
We find manufacturing customers and funding programs together and propose jointly.
Data is delivered as equipment → sensor → value → status, so adding machines does not mean rewriting your integration.
site_id and equipment_id tell you which site and which machine the data comes from.Actual fields and update intervals are agreed in a technical meeting.
Check the data structure and integration approach ahead of the technical meeting. Detailed specifications are provided in the meeting (NDA if needed).
Sample data is for illustration only; actual fields and values vary by site and project.
Share your solution and target project
Integration scope and roles (NDA if needed)
Verify integration with demo equipment and test data
Customer deployment, joint proposal and delivery
We handle the field side (OT): panel design, build and installation, PLC, drive and sensor integration, data transfer to the cloud or customer servers, and standardized data. MES, AI analytics, digital twins and customer-facing services stay with your solution, while we focus on delivering reliable field data. See partnership models →
We are not tied to any single brand. For new equipment we build the Intelligent Control Panel around a PLC that supports MQTT and connect it directly, without a separate gateway. For third-party PLCs already on site (e.g., Mitsubishi, LS, Siemens) we only read data, choosing OPC UA, Modbus TCP or the vendor's own protocol through a gateway, in that order. We confirm the model and protocol during the site survey and propose the method for each project.
Yes. We check the existing panel and PLC during the site survey and propose the best approach: replacing it with an Intelligent Control Panel, a new installation, or integrating with the existing equipment. Motors, pumps and other machines stay as they are.
Motor winding temperature (U·V·W), bearing temperature, speed, voltage, current and energy, vibration, ambient temperature and humidity, and run-status signals. Each sensor comes with value, unit and a status (normal, warning, alarm) based on thresholds, so your system can use it without extra processing. Get sample data →
REST API for machine and sensor lists, latest values and history; WebSocket for real-time values and status changes; CSV export for testing and analysis. Endpoints, authentication and update intervals are agreed in the technical meeting. Get the integration overview →
Equipment control continues on the site PLC. Readings taken while the connection is down are stored in the control panel and resent automatically, oldest first, once the connection is back. Timestamps are recorded on site and every message carries a sequence number, so the server can detect duplicates and gaps.
Yes. Data follows the DONG-IN ENSIS OT data specification, which defines the MQTT topic structure, message format and standard tag naming, and is versioned. Data arrives in the same structure regardless of equipment brand or site. The detailed specification is provided in a technical meeting after an NDA.
For an AI result to change how equipment runs, a PLC program has to receive that value. On Intelligent Control Panels whose PLC program we develop, we are piloting (PoC) control that sends AI-optimized setpoints back to the site PLC and applies them to motor operation. Interlocks and final control stay with the site PLC, and existing third-party PLCs are read-only. Scope and method are agreed in the technical meeting.
Control and communication are separated by design: control logic runs as a higher-priority task than data transmission, and the control and data networks are separated. Traffic and control-cycle criteria are agreed per project and confirmed during commissioning.
No. Every machine is delivered in the same structure (site, machine, sensor, value and status), so the same integration code keeps working as machines and sensors are added.
DataHub and the dashboard can be installed on the customer's server inside their network, using their existing server or one we supply. It uses the same data structure and API as the cloud option, so your system integrates the same way within the plant network.
MQTT traffic between the site and the cloud or customer servers is encrypted with TLS, and interlocks and final control stay with the on-site PLC, so the server never controls machines directly. Accounts, permissions and data retention are defined in the project contract, and the network setup follows the customer's security policy. See security overview →
As a rule, we keep a register of each installed panel's PLC model, firmware and program versions, and certificate expiry. Firmware and program changes are tested beforehand and made with the customer's approval, and remote access is only through a customer-approved secure connection (VPN). Operating details are agreed in the contract to fit the customer's security policy.
The Schneider Modicon M262 controller used in our panels holds an EU RO mutual-recognition certificate (hardware) accepted by KR, DNV, ABS, LR and other societies. The control panel and application software are approved for each vessel through the classing society's drawing approval and a surveyor-witnessed factory acceptance test (FAT).
Yes. Start by checking the structure in your system with our sample data, then verify the actual integration with your platform using demo equipment and test data. Scope and schedule are set in the technical meeting.
We design, build, install, commission and maintain the panels. As an OT engineering company that has built control panels for 35 years, we take responsibility for the field work that panel modification and installation require. A standard project takes 9 to 15 weeks, depending on site conditions.
Yes. We can find manufacturing customers together and, as a registered smart-factory supplier, join government support programs jointly. Joint proposals using demo equipment are also possible. See the joint sales model →
Each project contract defines the roles and responsibilities of the customer, your company and DONG-IN ENSIS, data ownership and use, and retention. An NDA can be signed from the technical meeting stage if needed.
Tell us about your solution and how you would like to work together.